Skip to main content

Thread: Ra73 driver swap on Ubuntu makes USB adapter disappear . How do I bring it back?

-

i using ubuntu incredible ibex on lenovo t400 hawking hwug1 usb adapter. capturing wpa handshakes enough aircrack-ng. didn’t satisfy cowpatty.

the built-in wireless adapter on lenovo t400 appeared wlan0. hwug1 usb adapter appeared wlan1. “airmon-ng start wlan1” command configured hwug usb adapter mon0.

things okay not great. wanted use cowpatty , rainbow tables captures weren’t satisfactory, except ones on own router 5 feet away. tried using 3 foot omni 12 db antenna

i started suspect drivers.i using drivers came ubuntu incredible ibex.

i saw website http://www.aircrack-ng.org/doku.php?id=rt73 , followed instructions install rt73-k2wrlz-3.0.3 driver.

when ran “airmon-ng start wlan1”, saw hawking indeed rausb0 , using rt73 driver.

when ran “aireplay” on wifi router de authenticate myself got 0/0 acks. getting (63/66 acks).it happened on other test routers.

so did more reading , thinking rt73-k2wrlz-3.0.3.driver incompatible incredible ibex kernel , ubuntu. found site http://mcmlxxii.co.uk/2008/10/22/rt73-ubuntu-intrepid-8-10/ , followed instructions install rt73-cvs-daily driver. didn’t install wicd.

after that, hwug1 usb disappeared wlan1. doesn’t show when run “ifconfig” command. built-in onboard wireless adapter shows wlan0.

how can bring wlan1 , hawking hwug1 usb adapter? furthermore how can reinstate original driver using?

do think usb adapter dying? new driver displayed quite few ap's under airodump perhaps tx function lost.


Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Networking & Wireless [ubuntu] Ra73 driver swap on Ubuntu makes USB adapter disappear . How do I bring it back?


Ubuntu

Comments

Post a Comment

Popular posts from this blog

Error compiling for board Arduino/Genuino Uno.

-
hi new arduino , trying write code of temperature controlled fridge can adjust pot , temp in fridge changes lowest setting -15 , highest setting 30degrees. the temp drops below input pot im trying make compressor turn on , light show compressor on. new @ , im still not quite sure im doing. error below keeps popping , im not quite sure whats wrong code. im hoping on close path how should have done it, how fix error appreciated. arduino: 1.8.4 (windows 10), board: "arduino/genuino uno" c:\users\admin\appdata\local\temp\ccfcxdpc.ltrans0.ltrans.o:(.rodata+0x6): undefined reference `print::write(unsigned char const*, unsigned int)' c:/program files (x86)/arduino/hardware/tools/avr/bin/../lib/gcc/avr/4.9.2/../../../../avr/lib/avr5/crtatmega328p.o:(.init9+0x0): undefined reference `main' collect2.exe: error: ld returned 1 exit status exit status 1 error compiling board arduino/genuino uno. this report have more information with "show verbose output during comp
Read more

Installation database is corrupt

-
dear all,   last month installed trial version of cs3 on pc , when decided install extended version of cs3, it  didn't install.  learned adobe use wincs3clean script, downloaded , ran on computer, using level 1. after tried installing extended version of cs3 got message "installation database corrupt" , can't install cs3.  can me , let me know how solve problem? use windows, xp 2. appreciate help. charleshhh install what... disc or download   if download... rename original , download again... downloads corrupted More discussions in Photoshop Windows (read only) adobe
Read more

esp8266 (nodemcu 0.9) client.write très lent ???

-
Image
bonjour à tous, j'essaie d'établir une communication entre une carte nodemcu exp8266 et mon pc en wifi via les sockets wifi. cela fonctionne plutôt bien mais le problème vient de la lenteur des instructions liés à l'écriture : par exemple client.write(buf) qui s'exécute en 200ms et est donc bloquante. comment peut on faire pour réduire ce temps d'écriture car c'est vraiment handicapant. merci a+ antoconde vous êtes sous windows? si oui c'est sans doute dû aux delayed acks quote if make network trace network sniffer such microsoft network monitor, tcp server sends tcp ack segment last tcp segment in tcp data stream in delayed acknowledgement timer (also known delayed ack timer). default, windows operating systems, value timer 200 milliseconds (ms). faut éventuellement gérer l'agrégagtion d'ack dans votre code pc en contournant les infos systèmes. ça améliorera un peu les choses - mais le problème est côté pc pas esp (pa
Read more