Skip to main content

Thread: How can I get a Verizon UMW190 to work in 9.10?

-

i tried using vzaccess manager in wine. didn't work. click on "enable mobile broadband" button after clicking on networks notification. i'm not sure how fill out wizard hoping help.

here screenshots how far got.
thanks!
attached images attached images

i have same mobile broadband modem , use regularly without problems.

verizon umw190 called "global ready" 3g modem, meaning connects both cdma , gsm networks. alas, ubuntu 9.10's network manager identifies modem gsm only, until gets fixed, connecting on cdma network (such verizon's network in us) requires use additional application.

install "gnome-ppp" -- application use connect -- can find under applications -> ubuntu software center, or under system -> administration -> synaptic package manager. (once have installed it, may want restart computer undo else may have done while trying solve problem.)

use modem, following:

step 1. plug modem in.
step 2. launch gnome-ppp administrator (e.g., press alt-f2 , type "gksu gnome-ppp"), , configure following settings:

  • modem tab
    • device: /dev/ttyacm0 (in case, auto-detect button correctly identified device)
    • type: usb modem (do not leave analog modem!)
    • speed: 460800
    • phone line: tone
    • volume: off



  • options tab
    • minimize: checked
    • dock in notification area: checked


click close. fill in fields in main gnome ppp window:

  • username: 1234567890@vzw3g.com (any 10-digit number works me)
  • password: vzw
  • phone number: #777

step 3. click connect. should it.


disconnect, click on gnome-ppp dock notification icon.

these settings saved next time need connect.

(hat tip: http://www.jasons.org/2008/09/02/how...-ubuntu-hardy/)


Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Networking & Wireless [ubuntu] How can I get a Verizon UMW190 to work in 9.10?


Ubuntu

Comments

Post a Comment

Popular posts from this blog

Error compiling for board Arduino/Genuino Uno.

-
hi new arduino , trying write code of temperature controlled fridge can adjust pot , temp in fridge changes lowest setting -15 , highest setting 30degrees. the temp drops below input pot im trying make compressor turn on , light show compressor on. new @ , im still not quite sure im doing. error below keeps popping , im not quite sure whats wrong code. im hoping on close path how should have done it, how fix error appreciated. arduino: 1.8.4 (windows 10), board: "arduino/genuino uno" c:\users\admin\appdata\local\temp\ccfcxdpc.ltrans0.ltrans.o:(.rodata+0x6): undefined reference `print::write(unsigned char const*, unsigned int)' c:/program files (x86)/arduino/hardware/tools/avr/bin/../lib/gcc/avr/4.9.2/../../../../avr/lib/avr5/crtatmega328p.o:(.init9+0x0): undefined reference `main' collect2.exe: error: ld returned 1 exit status exit status 1 error compiling board arduino/genuino uno. this report have more information with "show verbose output during comp
Read more

Installation database is corrupt

-
dear all,   last month installed trial version of cs3 on pc , when decided install extended version of cs3, it  didn't install.  learned adobe use wincs3clean script, downloaded , ran on computer, using level 1. after tried installing extended version of cs3 got message "installation database corrupt" , can't install cs3.  can me , let me know how solve problem? use windows, xp 2. appreciate help. charleshhh install what... disc or download   if download... rename original , download again... downloads corrupted More discussions in Photoshop Windows (read only) adobe
Read more

esp8266 (nodemcu 0.9) client.write très lent ???

-
Image
bonjour à tous, j'essaie d'établir une communication entre une carte nodemcu exp8266 et mon pc en wifi via les sockets wifi. cela fonctionne plutôt bien mais le problème vient de la lenteur des instructions liés à l'écriture : par exemple client.write(buf) qui s'exécute en 200ms et est donc bloquante. comment peut on faire pour réduire ce temps d'écriture car c'est vraiment handicapant. merci a+ antoconde vous êtes sous windows? si oui c'est sans doute dû aux delayed acks quote if make network trace network sniffer such microsoft network monitor, tcp server sends tcp ack segment last tcp segment in tcp data stream in delayed acknowledgement timer (also known delayed ack timer). default, windows operating systems, value timer 200 milliseconds (ms). faut éventuellement gérer l'agrégagtion d'ack dans votre code pc en contournant les infos systèmes. ça améliorera un peu les choses - mais le problème est côté pc pas esp (pa
Read more