Skip to main content

Thread: Can't resume from Suspend or Hibernate: Help!

-

after suspending, , trying resume, screen remains blank, , cannot access pc network.

after hibernating, pc resumes, except have no keyboard or mouse control, related error messages below:

[ 809.786082] hub 3-1:1.0: hub_port_status failed (err = -62)
[ 809.788081] hub 3-1:1.0: hub_port_status failed (err = -62)
[ 809.790072] hub 3-1:1.0: hub_port_status failed (err = -62)
[ 809.792063] hub 3-1:1.0: hub_port_status failed (err = -62)
[ 809.826081] hub 3-1:1.0: hub_port_status failed (err = -62)
[ 809.830079] hub 3-1:1.0: cannot disable port 1 (err = -62)
[ 809.830084] pm_op(): usb_dev_restore+0x0/0x10 returns -62
[ 809.830086] pm: device 3-1.1 failed restore: error -62
[ 809.832080] hub 3-1:1.0: hub_port_status failed (err = -62)
[ 809.836062] hub 3-1:1.0: cannot disable port 4 (err = -62)
[ 809.836065] pm_op(): usb_dev_restore+0x0/0x10 returns -62
[ 809.836066] pm: device 3-1.4 failed restore: error -62
[ 809.836873] pm: image restored successfully.


can still access pc network (which how got above log file).

suggestions on how 1 or both suspend , hibernate working?

jaunty/9.04

thanks!



Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Hardware [ubuntu] Can't resume from Suspend or Hibernate: Help!


Ubuntu

Comments

Post a Comment

Popular posts from this blog

Error compiling for board Arduino/Genuino Uno.

-
hi new arduino , trying write code of temperature controlled fridge can adjust pot , temp in fridge changes lowest setting -15 , highest setting 30degrees. the temp drops below input pot im trying make compressor turn on , light show compressor on. new @ , im still not quite sure im doing. error below keeps popping , im not quite sure whats wrong code. im hoping on close path how should have done it, how fix error appreciated. arduino: 1.8.4 (windows 10), board: "arduino/genuino uno" c:\users\admin\appdata\local\temp\ccfcxdpc.ltrans0.ltrans.o:(.rodata+0x6): undefined reference `print::write(unsigned char const*, unsigned int)' c:/program files (x86)/arduino/hardware/tools/avr/bin/../lib/gcc/avr/4.9.2/../../../../avr/lib/avr5/crtatmega328p.o:(.init9+0x0): undefined reference `main' collect2.exe: error: ld returned 1 exit status exit status 1 error compiling board arduino/genuino uno. this report have more information with "show verbose output during comp
Read more

Installation database is corrupt

-
dear all,   last month installed trial version of cs3 on pc , when decided install extended version of cs3, it  didn't install.  learned adobe use wincs3clean script, downloaded , ran on computer, using level 1. after tried installing extended version of cs3 got message "installation database corrupt" , can't install cs3.  can me , let me know how solve problem? use windows, xp 2. appreciate help. charleshhh install what... disc or download   if download... rename original , download again... downloads corrupted More discussions in Photoshop Windows (read only) adobe
Read more

esp8266 (nodemcu 0.9) client.write très lent ???

-
Image
bonjour à tous, j'essaie d'établir une communication entre une carte nodemcu exp8266 et mon pc en wifi via les sockets wifi. cela fonctionne plutôt bien mais le problème vient de la lenteur des instructions liés à l'écriture : par exemple client.write(buf) qui s'exécute en 200ms et est donc bloquante. comment peut on faire pour réduire ce temps d'écriture car c'est vraiment handicapant. merci a+ antoconde vous êtes sous windows? si oui c'est sans doute dû aux delayed acks quote if make network trace network sniffer such microsoft network monitor, tcp server sends tcp ack segment last tcp segment in tcp data stream in delayed acknowledgement timer (also known delayed ack timer). default, windows operating systems, value timer 200 milliseconds (ms). faut éventuellement gérer l'agrégagtion d'ack dans votre code pc en contournant les infos systèmes. ça améliorera un peu les choses - mais le problème est côté pc pas esp (pa
Read more